IronPython Script Snippets

From DWSIM - Chemical Process Simulator
Revision as of 17:17, 2 July 2019 by DanWBR (Talk | contribs) (Created page with "= Script Manager Snippet 1: Create and Connect Objects = Assuming that you're running a simulation with defined compound(s) and property package(s), this will create and conn...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Script Manager Snippet 1: Create and Connect Objects

Assuming that you're running a simulation with defined compound(s) and property package(s), this will create and connect a cooler and its connections:

<script lang=python>

import clr clr.AddReference('DWSIM.Interfaces')

from DWSIM import Interfaces

cooler = Flowsheet.AddObject(Interfaces.Enums.GraphicObjects.ObjectType.Cooler, 100, 100, 'COOLER-001') heat_out = Flowsheet.AddObject(Interfaces.Enums.GraphicObjects.ObjectType.EnergyStream, 130, 150, 'HEAT_OUT') inlet = Flowsheet.AddObject(Interfaces.Enums.GraphicObjects.ObjectType.MaterialStream, 50, 100, 'INLET') outlet = Flowsheet.AddObject(Interfaces.Enums.GraphicObjects.ObjectType.MaterialStream, 150, 100, 'OUTLET')

cooler.GraphicObject.CreateConnectors(1, 1) inlet.GraphicObject.CreateConnectors(1, 1) outlet.GraphicObject.CreateConnectors(1, 1) heat_out.GraphicObject.CreateConnectors(1, 1)

Flowsheet.ConnectObjects(inlet.GraphicObject, cooler.GraphicObject, 0, 0) Flowsheet.ConnectObjects(cooler.GraphicObject, outlet.GraphicObject, 0, 0) Flowsheet.ConnectObjects(cooler.GraphicObject, heat_out.GraphicObject, 0, 0)


</script>


Comments